Reset Epson ET-2851
If you own an Epson ET-2851 printer and have been encountering issues related to the waste ink pad counter, then resetting the printer’s adjustment program might be the solution you need. The waste ink pad counter is a feature in Epson printers that tracks the amount of ink used during print operations and alerts the user when the pads are nearing their maximum capacity. When this counter reaches its limit, you may start experiencing error messages like E-11, indicating that the waste ink pads need to be replaced or reset.
To reset the Epson ET-2851 adjustment program and resolve the E-11 error, you will need a resetter tool. The resetter tool is a software application specifically designed to reset the waste ink pad counter in Epson printers. You can find this tool online, usually available for free or at a nominal cost.
Once you have downloaded the resetter tool, follow these steps to reset the Epson ET-2851 adjustment program:
1. Install the resetter tool on your computer and connect the printer to it.
2. Open the resetter tool and select the appropriate printer model (Epson ET-2851).
3. Click on the “Reset” button or any similar action mentioned in the tool’s interface.
4. Wait for the reset process to complete.
5. Disconnect the printer from the computer and turn it off.
6. Wait for a few seconds, then turn the printer back on.
After performing these steps, the Epson ET-2851 adjustment program should be reset, and the waste ink pad counter should be back to 100%. You can now resume your printing tasks without encountering the E-11 error.
It is important to note that resetting the waste ink pad counter is a temporary solution, and it is advisable to replace or clean the pads as soon as possible to avoid any ink leakage or damage to the printer’s internal components.
Download Epson ET-2851 Resetter
– Epson ET-2851 Resetter For Windows: Download
– Epson ET-2851 Resetter For MAC: Download
How to Reset Epson ET-2851
1. Read Epson ET-2851 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson ET-2851 Waste Ink Pad Counter
– Buy Serial Key:
4. Wait 30s, turn Epson ET-2851 off then on
5. Check Epson ET-2851 Counter
How to reset Epson ET-2851 Adjustment Program ,resetter epson ET2851 Waste ink pad counter 100% E-11 on Youtube
– Video How to reset Epson ET-2851 Adjustment Program ,resetter epson ET2851 Waste ink pad counter 100% E-11 on YouTube, as of the current time, has received 259 views with a duration of 2:36, taken from the YouTube channel: youtube.com/@datvietcomputer.
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien