Chipless Printers
Reset Epson XP-242
Resetting an Epson ink cartridge and tricking it into thinking it’s full can be a great way to save money and maximize the usage of your printer. Instead of rushing to buy a new cartridge every time your printer runs out of ink, resetting the old cartridge can help you squeeze out every last drop of ink.
To begin with, it’s important to understand that not all Epson ink cartridges can be reset, particularly the newer models. However, many older models can be reset using a simple method. Start by removing the cartridge from your printer and inspecting it for any signs of damage or leakage. If it appears intact, move on to the next step.
Locate the small circuit board on the cartridge, commonly known as the “chip”. Take a small piece of clear tape and cover the bottom row of contacts on the chip. This effectively blocks the cartridge from communicating with the printer, tricking it into thinking that the ink cartridge is still full.
Once the tape is in place, carefully reinsert the cartridge into the printer. Make sure it is securely in place. Close the lid and restart your printer. The printer should no longer give you a low ink warning, as it is now fooled into thinking that the cartridge is full.
It’s important to note that this method may not work on all Epson printers or cartridges. Additionally, be aware that tricking the printer into thinking the cartridge is full does not actually replenish the ink levels. It simply allows you to continue printing until the ink is completely depleted.
Using this reset method can be an effective way to extend the life of your ink cartridge, but it is not a long-term solution. Eventually, you will need to replace the cartridge once it has truly run out of ink.
Download Epson XP-242 Resetter
– Epson XP-242 Resetter For Windows: Download
– Epson XP-242 Resetter For MAC: Download
How to Reset Epson XP-242
1. Read Epson XP-242 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson XP-242 Waste Ink Pad Counter
– Buy Serial Key:
4. Wait 30s, turn Epson XP-242 off then on
5. Check Epson XP-242 Counter
How to reset an Epson ink cartridge and trick it into thinking it’s full. on Youtube
– Video How to reset an Epson ink cartridge and trick it into thinking it’s full. on YouTube, as of the current time, has received 1630324 views with a duration of 3:04, taken from the YouTube channel: youtube.com/@bigfirestarter.
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
