Epson D68 Waste Ink Pad Counter Reset

Reset Epson D68

Reset Epson D68

If you own an Epson D68 printer, you may encounter a common issue where the printer suddenly stops functioning and displays a “Waste Ink Pad Counter” error message. This error occurs when the printer’s waste ink pads, which collect excess ink during the printing process, are determined to be full.

Dealing with this issue can be frustrating, but there is a solution available – resetting the Epson D68 Waste Ink Pad Counter. By resetting the counter, you can clear the error message and resume using your printer without any hindrances.

To reset the Epson D68 Waste Ink Pad Counter, you can follow a few simple steps. Firstly, ensure that the printer is turned off and disconnected from the power source. Next, press and hold the “Maintenance” and “Power” buttons simultaneously. Keep them pressed until the power LED flashes and then release both buttons.

Following these steps will initiate the reset process, and after a few moments, the power LED should stop flashing, indicating that the counter has been successfully reset. You can now turn on your printer and check if the error message is gone.

Resetting the Epson D68 Waste Ink Pad Counter is a simple and effective way to resolve the waste ink pad issue. However, it is important to note that this process should only be performed if you are confident in doing so. If you are unsure or uncomfortable with performing the reset yourself, it is recommended to seek professional assistance from Epson or an authorized service center.

By addressing this waste ink pad counter error promptly, you can ensure the continued functioning of your Epson D68 printer and maintain its optimal printing performance.

|You are inspecting closely: Reset Epson D68 at chiplessprinter.com

Download Epson D68 Resetter

– Epson D68 Resetter For Windows: Download
– Epson D68 Resetter For MAC: Download

Reset Epson Waste Ink Pad Counter
Reset Epson Waste Ink Pad Counter
Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.

How to Reset Epson D68

1. Read Epson D68 Waste Ink Pad Counter:

Reset Epson D68 Step 2

If Resetter shows error: I/O service could not perform operation… same as below picture:
I/O service could not perform operation

==>Fix above error with Disable Epson Status Monitor: Click Here,  restart printer/computer and then try again.
2. Reset Epson D68 Waste Ink Pad Counter
Reset Epson D68 Step 3

– Buy Serial Key:
Reset Epson Waste Ink Pad Counter
Reset Epson Waste Ink Pad Counter
Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.
3. Put Serial Key:
Reset Epson D68 Step 4

4. Wait 30s, turn Epson D68 off then on
Reset Epson D68 Step 5

Reset Epson D68 Step 6

Reset Epson D68 Step 7

5. Check Epson D68 Counter
Reset Epson D68 Step 8

#Go deeper into the topic https://chiplessprinter.com/resetter-for-epson-d120-dx8400-dx9400f-dx7400-dx7450.html

Reset Epson D68 Waste Ink Pad Counter on Youtube

– Video Reset Epson D68 Waste Ink Pad Counter on YouTube, as of the current time, has received 1736 views with a duration of 1:39, taken from the YouTube channel: youtube.com/@hethongbaotri9031.


Reset Epson Waste Ink Pad Counter
Reset Epson Waste Ink Pad Counter
Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.

Contact Support:

Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien

About dangmien

Information Security, SEO Experts, Web Design, Computer Science, Printer Technician

Check Also

Epson XP850 Reset: Unlimited Ink Pad Reset 100% Free of Viruses

Reset Epson XP-850 Are you tired of receiving error messages on your Epson XP850 printer …

Leave a Reply