Chipless Printers
Reset Epson ET-2823
If you own an Epson Ecotank printer, you may encounter an error message stating “Ink pad end of service life.” This error message refers to the ink pads inside your printer that absorb excess ink during printing and cleaning procedures. When these ink pads are saturated, Epson has designed the printer to display this message to prevent any potential damage to the printer.
Fortunately, there are a few steps you can take to fix this issue. Keep in mind that this solution may vary depending on the specific model of your Epson Ecotank printer.
Firstly, it is important to note that fixing this error requires resetting the ink pad counter. To do this, you will first need to download and install Epson’s Adjustment Program on your computer. You can find this program on Epson’s official website or through a trusted third-party source. Once installed, run the program and select your printer model.
Next, you will need to reset the ink pad counter using the Adjustment Program. Follow the instructions provided by the program to complete the reset process. After the reset, restart your printer and check if the error message has disappeared. If it has, congratulations! You have successfully fixed the “Ink pad end of service life” issue.
However, it is important to note that resetting the ink pad counter does not physically replace or clean the ink pads. Therefore, it is recommended to contact an authorized service center to replace or clean the ink pads to avoid any potential ink leakage or damage to your printer.
Overall, fixing the “Ink pad end of service life” error on Epson Ecotank printers requires a simple software reset. However, it is important to understand the risks involved with ignoring the physical state of your ink pads.
Download Epson ET-2823 Resetter
– Epson ET-2823 Resetter For Windows: Download
– Epson ET-2823 Resetter For MAC: Download
How to Reset Epson ET-2823
1. Read Epson ET-2823 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson ET-2823 Waste Ink Pad Counter
– Buy Serial Key:
4. Wait 30s, turn Epson ET-2823 off then on
5. Check Epson ET-2823 Counter
How to fix “Ink pad end of service life” on Epson Ecotank Printers on Youtube
– Video How to fix “Ink pad end of service life” on Epson Ecotank Printers on YouTube, as of the current time, has received 55642 views with a duration of 13:43, taken from the YouTube channel: youtube.com/@CrimsonCreationsCo.
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
