Reset Epson XP-330
If you own an Epson XP series printer, you may at some point encounter a common issue – ink waste pads that need cleaning. Ink waste pads are absorbent sponges inside the printer that collect excess ink. Over time, these pads can become saturated and affect the printer’s performance. Fortunately, cleaning them is a relatively simple process that can be done at home.
Before you start, ensure the printer is turned off and unplugged from the power source. Locate the ink waste pads. In most Epson XP series printers, they are located beneath the printer cartridges. To access them, you may need to remove the cartridges and the print head.
Once you have accessed the waste pads, carefully remove them from the printer. It is recommended to wear gloves as the waste pads can be messy. Place the pads in a container filled with warm, soapy water. Gently squeeze and rub the pads to release the absorbed ink. You may need to repeat this process until the pads are thoroughly clean.
After cleaning, rinse the pads under running water to remove any remaining ink and soap residue. Once they are clean, squeeze out any excess water and pat them dry with a cloth or paper towels. Ensure the pads are completely dry before reinserting them into the printer.
Once you have cleaned and dried the ink waste pads, reinstall them back into the printer. Make sure they are placed back in their original position. Close the printer and plug it back in. Start the printer and check if the issue has been resolved.
Cleaning ink waste pads on Epson XP series printers is an essential maintenance task that can help prevent printing issues caused by clogged or saturated pads. By following these steps, you can easily clean the waste pads and prolong the lifespan of your printer.
Download Epson XP-330 Resetter
– Epson XP-330 Resetter For Windows: Download
– Epson XP-330 Resetter For MAC: Download
How to Reset Epson XP-330
1. Read Epson XP-330 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson XP-330 Waste Ink Pad Counter
– Buy Serial Key:
4. Wait 30s, turn Epson XP-330 off then on
5. Check Epson XP-330 Counter
How To Clean Ink Waste Pads On Epson XP Series Printers on Youtube
– Video How To Clean Ink Waste Pads On Epson XP Series Printers on YouTube, as of the current time, has received 52969 views with a duration of 4:03, taken from the YouTube channel: youtube.com/@BillOfAllTrades2016.
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien