Reset Epson ET-2550
The Epson EcoTank Printer is known for its innovative ink tank system, which eliminates the need for traditional ink cartridges and reduces printing costs. However, like any printer, the EcoTank also requires regular maintenance to ensure optimal performance. One common issue faced by EcoTank users is the need for waste ink pad replacement and ink counter reset. In this article, we will provide a step-by-step guide on how to perform this procedure on the Epson EcoTank Printer model ET-2550.
To begin the waste ink pad replacement and ink counter reset procedure, ensure that the printer is turned off and unplugged. Next, carefully open the scanner unit to access the print head and ink cartridge holder.
Once the print head and ink cartridge holder are visible, locate the waste ink pad on the right-hand side of the printer. Gently remove the pad and dispose of it properly. It is important to note that waste ink pads can be messy, so it is recommended to wear gloves and have a paper towel handy.
After replacing the waste ink pad, it is time to reset the ink counter. Turn on the printer while holding down the power button and the stop/clear button simultaneously. Release the buttons once the power light and the ink lights start flashing.
Using the navigation buttons on the printer’s control panel, navigate to the “Maintenance” or “Reset” menu. Select the “Ink Counter Reset” option, and press the OK button to confirm. The ink counter will be reset, and the flashing lights will stop. Finally, close the scanner unit and proceed to use the printer as usual.
Performing the waste ink pad replacement and ink counter reset on the Epson EcoTank Printer ET-2550 is a fairly simple procedure, but it is important to follow the instructions carefully to avoid any damage to the printer. Regular maintenance, including this procedure, will ensure that your EcoTank printer continues to deliver high-quality prints while maintaining its efficiency and longevity.
Download Epson ET-2550 Resetter
How to Reset Epson ET-2550
1. Read Epson ET-2550 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson ET-2550 Waste Ink Pad Counter
– Buy Serial Key:
4. Wait 30s, turn Epson ET-2550 off then on
5. Check Epson ET-2550 Counter
Epson EcoTank Printer Waste Ink Pad Replacement and Ink Counter Reset (ET-2550) Procedure (How to) on Youtube
– Video Epson EcoTank Printer Waste Ink Pad Replacement and Ink Counter Reset (ET-2550) Procedure (How to) on YouTube, as of the current time, has received 83691 views with a duration of 7:24, taken from the YouTube channel: youtube.com/@Bootstrappin.