How to Reset Epson L211 Waste Ink Pad Counter

Reset Epson L211

Resetting the waste ink pad counter on the Epson L211 printer is an essential process to ensure smooth and uninterrupted printing operations. The waste ink pad is a foam pad located inside the printer that absorbs excess ink during printing and cleaning cycles. Over time, this pad can become saturated with ink, resulting in an error message indicating that the printer’s life has ended and needs to be replaced.

However, by resetting the waste ink pad counter, you can extend the life of your Epson L211 printer and avoid unnecessary expenses. The process of resetting the counter involves accessing the printer’s maintenance mode and using specific key combinations to initiate the reset procedure.

Resetting the waste ink pad counter should only be done when the waste ink pad has been cleaned or replaced. Performing this procedure without cleaning or replacing the pad can lead to ink overflow and other printer complications.

To reset the waste ink pad counter on the Epson L211 printer, follow these steps:

1. Make sure the printer is turned off.
2. Press and hold the Resume button, then press and hold the Power button simultaneously.
3. Continue holding both buttons until the Power and Resume lights start flashing.
4. Release both buttons and press the Resume button four times. The Power and Resume lights will continue flashing.
5. Finally, press the Power button to confirm the reset process.

By following these steps, you will successfully reset the waste ink pad counter on your Epson L211 printer. This will allow you to continue using your printer without the need for costly replacements or repairs.

|You are reviewing: Reset Epson L211 at chiplessprinter.com

Download Epson L211 Resetter

– Epson L211 Resetter For Windows: Download
– Epson L211 Resetter For MAC: Download

Reset Epson Waste Ink Pad Counter

Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.