Instructions for resetting an Epson printer | Steps for resetting a printer

Reset Epson PM-3500C

Reset Epson PM-3500C

If you’re having trouble with your Epson printer, a reset might be the solution you need. Resetting your printer can help resolve a wide range of issues, such as printing errors, connectivity problems, or even resetting the ink cartridges. Here’s a step-by-step guide on how to reset your Epson printer.

First, start by turning off your printer and disconnecting it from the power source. After a few seconds, plug it back in and turn it on.

Next, locate the reset button on your printer. This button is usually a small hole that can be found either on the back or side of the printer. Use a paperclip or a small object to press and hold the reset button for about 5 seconds.

Once you release the reset button, your printer will begin the resetting process. This may take a few minutes, so be patient and avoid interrupting the process.

After the printer finishes resetting, it will power off on its own. Wait for a couple of seconds and then turn it back on.

Once your printer has restarted, it should be back to its factory settings, and any issues you were experiencing should be resolved. However, keep in mind that resetting your printer will erase any custom settings or network configurations you had previously set up.

In conclusion, resetting your Epson printer is a quick and simple solution to troubleshoot various issues you might encounter. By following these steps, you can reset your printer and get it back up and running smoothly.

|You are paying attention to the text: Reset Epson PM-3500C at chiplessprinter.com

Download Epson PM-3500C Resetter

– Epson PM-3500C Resetter For Windows: Download
– Epson PM-3500C Resetter For MAC: Download

Reset Epson Waste Ink Pad Counter
Reset Epson Waste Ink Pad Counter
Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.

How to Reset Epson PM-3500C

1. Read Epson PM-3500C Waste Ink Pad Counter:

Reset Epson PM-3500C Step 2

If Resetter shows error: I/O service could not perform operation… same as below picture:
I/O service could not perform operation

==>Fix above error with Disable Epson Status Monitor: Click Here,  restart printer/computer and then try again.
2. Reset Epson PM-3500C Waste Ink Pad Counter
Reset Epson PM-3500C Step 3

– Buy Serial Key:
Reset Epson Waste Ink Pad Counter
Reset Epson Waste Ink Pad Counter
Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.
3. Put Serial Key:
Reset Epson PM-3500C Step 4

4. Wait 30s, turn Epson PM-3500C off then on
Reset Epson PM-3500C Step 5

Reset Epson PM-3500C Step 6

Reset Epson PM-3500C Step 7

5. Check Epson PM-3500C Counter
Reset Epson PM-3500C Step 8

#Go over the complete text https://chiplessprinter.com/mct-tech-offers-a-100-solution-to-changing-the-maintenance-box-chip-for-epson-pm-520-printer.html

How to reset Epson printer | How to reset printer on Youtube

– Video How to reset Epson printer | How to reset printer on YouTube, as of the current time, has received 42064 views with a duration of 2:22, taken from the YouTube channel: youtube.com/@techininfo1369.


Reset Epson Waste Ink Pad Counter
Reset Epson Waste Ink Pad Counter
Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.

Contact Support:

Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien

About dangmien

Information Security, SEO Experts, Web Design, Computer Science, Printer Technician

Check Also

Epson XP850 Reset: Unlimited Ink Pad Reset 100% Free of Viruses

Reset Epson XP-850 Are you tired of receiving error messages on your Epson XP850 printer …

Leave a Reply