Reset HP 103A Firmware V3.82.01.08

HP 103A Firmware Update Chipless Overview

– Product name: HP 103A Permanent Clear Toner Chip Page Counter.
– Version: V3.82.01.08.
– Fix errors: Cartridge is low, Cartridge is very low, very low toner.
– Compatible models: HP Laser 103A.
– Compatible toner cartridges:

HP 103A Toner Cartridge Code

HP W1103A

– Functional: Modify HP 103A Printer’s Firmware -> HP 103A printer will not require Toner Chips (IC Chips on toner cartridges) anymore. You will not need toner chip or replace toner cartridges if they are broken. Fix red light or red light blinking: install new toner cartridge, toner life end, replace new toner cartridge, toner empty, toner low, toner exhausted…Makes HP 103A to work without toner chip.
– Additional info:
Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.

It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip – a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer.

And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the “UPS” (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!!

How to Reset Page Counter HP 103A

1. Connect the HP 103A printer to the computer by usb cable and turn it off.
2. Log HP 103A printer in force mode:
– While holding the “Continue / Cancel” button to turn on the printer, hold both buttons until the device is detected via USB.
– How to login download mode (Video):


3. Drag and drop *.hd to usbprns2.exe.
Firmware HP 103A

– How to update firmware fix (video):

4. The reprogramming process starts automatically.
5. Wait until the printer reprograms (5 – 10 minute) and restarts.
6. After that the reprogramming process is finished, use tapes to cover toner chip and restart the printer.

Download Firmware Reset HP 103A: $12 USD


Your Printer's name:

(*) Find Printer's Name

Your Printer's Version:

(*) How to find Version?

Your printer's serial number:

(*) Find serial number

Your printer's chip crum number:

How to find CRUM?

Your E-Mail:

(*)

(*) Please fill request field

 

About dangmien

Information Security, Web Design, Computer Science, Printer Technician

Check Also

Reset HP MFP 133 Firmware V3.82.01.02

HP MFP 133 Firmware Update Chipless Overview – Product name: HP MFP 133 Permanent Clear …

Leave a Reply

Your email address will not be published. Required fields are marked *