Resetting Epson L551 Waste Ink Pad Counter

Reset Epson L551

Reset Epson L551

Resetting the waste ink pad counter on the Epson L551 printer is an important maintenance task that allows you to continue printing without interruptions. The waste ink pad is a sponge-like reservoir that absorbs excess ink during the printing process. Over time, this pad becomes full and needs to be replaced or reset in order to avoid potential damage to the printer.

Resetting the waste ink pad counter can be done by following a few simple steps. First, ensure that the printer is turned off and disconnected from any power source. Next, locate the control panel on the printer and press and hold the “Power” and “Resume” buttons simultaneously. While holding these buttons, connect the printer to a power source and continue holding the buttons until the printer’s LED lights start flashing.

Once the LED lights start flashing, release the buttons and press the “Resume” button four times. The LED lights will then stop flashing, indicating that the waste ink pad counter has been successfully reset. Finally, turn off the printer and wait for a few seconds before turning it back on. You can now resume printing without any issues.

Resetting the waste ink pad counter is essential to ensure the proper functioning of your Epson L551 printer. It helps prevent any potential damage caused by an overflow of ink and allows you to continue printing with peace of mind. Remember to perform this reset periodically or after a significant amount of printing to keep your printer running smoothly.

|You are taking a closer look: Reset Epson L551 at chiplessprinter.com

Download Epson L551 Resetter

– Epson L551 Resetter For Windows: Download
– Epson L551 Resetter For MAC: Download

Reset Epson Waste Ink Pad Counter
Reset Epson Waste Ink Pad Counter
Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.

How to Reset Epson L551

1. Read Epson L551 Waste Ink Pad Counter:

Reset Epson L551 Step 2

If Resetter shows error: I/O service could not perform operation… same as below picture:
I/O service could not perform operation

==>Fix above error with Disable Epson Status Monitor: Click Here,  restart printer/computer and then try again.
2. Reset Epson L551 Waste Ink Pad Counter
Reset Epson L551 Step 3

– Buy Serial Key:
Reset Epson Waste Ink Pad Counter
Reset Epson Waste Ink Pad Counter
Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.
3. Put Serial Key:
Reset Epson L551 Step 4

4. Wait 30s, turn Epson L551 off then on
Reset Epson L551 Step 5

Reset Epson L551 Step 6

Reset Epson L551 Step 7

5. Check Epson L551 Counter
Reset Epson L551 Step 8

#Investigate further https://chiplessprinter.com/epson-l550-waste-ink-pad-counter-reset.html

Reset Epson L551 Waste Ink Pad Counter on Youtube

– Video Reset Epson L551 Waste Ink Pad Counter on YouTube, as of the current time, has received 121 views with a duration of 4:42, taken from the YouTube channel: youtube.com/@resetprinter7584.


Reset Epson Waste Ink Pad Counter
Reset Epson Waste Ink Pad Counter
Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.

Contact Support:

Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien

About dangmien

Information Security, SEO Experts, Web Design, Computer Science, Printer Technician

Check Also

Epson XP850 Reset: Unlimited Ink Pad Reset 100% Free of Viruses

Reset Epson XP-850 Are you tired of receiving error messages on your Epson XP850 printer …

Leave a Reply