Chipless Printers
Reset Epson SX130
If you own an Epson printer model such as the S22, SX125, SX130, or SX235, you may have encountered an error message indicating that your printer’s waste ink counters are full. This can be quite frustrating, as it prevents you from printing any further documents. However, there is a solution – resetting the waste ink counters.
Epson printers are designed with built-in waste ink pads that collect excess ink during the printing process. Over time, these pads can become saturated, and the printer will display an error message indicating that they need to be replaced or reset. Resetting the waste ink counters can help clear this error and allow you to resume printing.
To reset the waste ink counters on your Epson S22, SX125, SX130, or SX235 printer, you can use a third-party software called the Epson Resetter tool. This tool is specifically designed to reset the waste ink counters and prolong the lifespan of your printer.
To start the reset process, you will need to download and install the Epson Resetter tool on your computer. Once installed, connect your printer to the computer and open the software. Follow the instructions provided by the tool to initiate the reset process. It will take a few minutes for the software to reset the counters.
After the reset process is complete, you can disconnect your printer from the computer and turn it off for a few seconds. When you turn it back on, the error message should no longer be displayed, and you can resume printing as usual.
It’s important to note that resetting the waste ink counters will not fix any physical issues with the printer. If you continue to experience problems or notice any unusual printing behavior, it is recommended to contact Epson customer support for further assistance.
In conclusion, if you are facing the issue of waste ink counters being full on your Epson S22, SX125, SX130, or SX235 printer, utilizing the Epson Resetter tool can help you resolve the problem and continue printing effortlessly.
Download Epson SX130 Resetter
– Epson SX130 Resetter For Windows: Download
– Epson SX130 Resetter For MAC: Download
How to Reset Epson SX130
1. Read Epson SX130 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson SX130 Waste Ink Pad Counter
– Buy Serial Key:
4. Wait 30s, turn Epson SX130 off then on
5. Check Epson SX130 Counter
Epson S22, SX125, SX130, SX235 printer reset waste ink counters on Youtube
– Video Epson S22, SX125, SX130, SX235 printer reset waste ink counters on YouTube, as of the current time, has received 80733 views with a duration of 0:57, taken from the YouTube channel: youtube.com/@SuperPrint2010.
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
