Step-by-Step Guide on Resetting Waste Ink Pad for Epson EcoTank ET 2760

Reset Epson ET-2826

Reset Epson ET-2826

If you own an Epson EcoTank ET 2760 printer, you may have encountered the “Waste Ink Pad” error message at some point. This error occurs when the printer’s waste ink pad is full and needs to be reset. The waste ink pad is a sponge-like material that absorbs excess ink during printing and cleaning processes. However, after a certain period, it becomes saturated with ink, causing the printer to display the error and preventing further printing.

Resetting the waste ink pad for the Epson EcoTank ET 2760 is a relatively easy process that can be done at home. Start by turning off the printer and unplugging it from the power source. Locate the maintenance box, which houses the waste ink pad, at the rear of the printer. Gently remove the box and place it on a flat surface.

Next, you need to clean the waste ink pad. Rinse it under warm running water until the ink is completely removed. It’s important to be cautious while doing this to avoid damaging the pad. After cleaning, let the pad dry completely before placing it back in the maintenance box.

Once the pad is dry, reinsert it into the maintenance box and carefully place it back into the printer. Restore the printer’s power by plugging it in and turning it on. The waste ink pad reset process is complete when the printer no longer displays the error message.

Remember to reset the waste ink pad periodically or when the printer prompts you to do so. By following these steps, you can ensure smooth and uninterrupted printing with your Epson EcoTank ET 2760 printer.

|You are researching: Reset Epson ET-2826 at chiplessprinter.com

Download Epson ET-2826 Resetter

– Epson ET-2826 Resetter For Windows: Download
– Epson ET-2826 Resetter For MAC: Download

Reset Epson Waste Ink Pad Counter
Reset Epson Waste Ink Pad Counter
Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.

How to Reset Epson ET-2826

1. Read Epson ET-2826 Waste Ink Pad Counter:

Reset Epson ET-2826 Step 2

If Resetter shows error: I/O service could not perform operation… same as below picture:
I/O service could not perform operation

==>Fix above error with Disable Epson Status Monitor: Click Here,  restart printer/computer and then try again.
2. Reset Epson ET-2826 Waste Ink Pad Counter
Reset Epson ET-2826 Step 3

– Buy Serial Key:
Reset Epson Waste Ink Pad Counter
Reset Epson Waste Ink Pad Counter
Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.
3. Put Serial Key:
Reset Epson ET-2826 Step 4

4. Wait 30s, turn Epson ET-2826 off then on
Reset Epson ET-2826 Step 5

Reset Epson ET-2826 Step 6

Reset Epson ET-2826 Step 7

5. Check Epson ET-2826 Counter
Reset Epson ET-2826 Step 8

#Dive into the subsequent segment https://chiplessprinter.com/simple-tutorial-step-by-step-guide-on-factory-resetting-an-epson-et-2760-printer.html

How to Reset Waste Ink Pad for Epson EcoTank ET 2760 on Youtube

– Video How to Reset Waste Ink Pad for Epson EcoTank ET 2760 on YouTube, as of the current time, has received 51645 views with a duration of 9:28, taken from the YouTube channel: youtube.com/@BCHTechnologies.


Reset Epson Waste Ink Pad Counter
Reset Epson Waste Ink Pad Counter
Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.

Contact Support:

Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien

About dangmien

Information Security, SEO Experts, Web Design, Computer Science, Printer Technician

Check Also

Epson XP850 Reset: Unlimited Ink Pad Reset 100% Free of Viruses

Reset Epson XP-850 Are you tired of receiving error messages on your Epson XP850 printer …

Leave a Reply