Chipless Printers
Reset Epson XP-300
Guide: Downgrade Printer Firmware (Fix Ink Not Recognized Error) Epson XP-300 to XP-630 (XP-640-646)
Having trouble with your Epson printer not recognizing your ink cartridges after updating its firmware? If you own an Epson XP-300, XP-430, XP-434, XP-440, or any other similar model, we might have a solution for you. In this guide, we’ll walk you through the process of downgrading your printer firmware to fix the ink not recognized error. Let’s get started!
Step 1: Check compatibility
Before proceeding, make sure your printer model is compatible with the firmware version you want to downgrade to. In this case, we will be downgrading from XP-300 to XP-630 (or XP-640-646). Ensure you have the correct firmware file downloaded.
Step 2: Prepare your printer
Make sure your printer is connected to your computer and both are turned on. If you haven’t already, install the printer drivers and software onto your computer.
Step 3: Access the Firmware Update Mode
To access the Firmware Update Mode, press and hold the ‘Stop,’ ‘Maintenance,’ and ‘Power’ buttons simultaneously.
Step 4: Select Firmware Update
Using the printer’s navigation buttons, select and enter the ‘Firmware Update’ option.
Step 5: Downgrade the firmware
On your computer, open the firmware downgrade file you downloaded earlier. Follow the on-screen instructions to execute the downgrade process. Do not turn off or disconnect your printer during this process.
Step 6: Confirm successful downgrade
Once the downgrade process is complete, check if your printer now recognizes the ink cartridges. Print a test page to ensure everything is working correctly.
By following these steps, you can successfully downgrade your printer firmware and resolve the ink not recognized error. Remember to double-check the compatibility of the firmware version you are downgrading to. If you encounter any issues or require further assistance, it’s advisable to consult the Epson support team or refer to their official documentation.
Download Epson XP-300 Resetter
– Epson XP-300 Resetter For Windows: Download
– Epson XP-300 Resetter For MAC: Download
How to Reset Epson XP-300
1. Read Epson XP-300 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson XP-300 Waste Ink Pad Counter
– Buy Serial Key:
4. Wait 30s, turn Epson XP-300 off then on
5. Check Epson XP-300 Counter
Guide: Downgrade Printer Firmware (Fix Ink Not Recognized Error) Epson XP-300 to XP-630 (XP-640-646) on Youtube
– Video Guide: Downgrade Printer Firmware (Fix Ink Not Recognized Error) Epson XP-300 to XP-630 (XP-640-646) on YouTube, as of the current time, has received 242247 views with a duration of 3:59, taken from the YouTube channel: youtube.com/@MattPilz.
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
