Resetting Epson SP 1390 Printer: A Step-by-Step Guide

Reset Epson Photo 1390

Reset Epson Photo 1390

If you are experiencing issues with your Epson SP 1390 Printer, resetting the printer may help resolve various problems and restore its functionality. Here’s a step-by-step guide on how to reset the Epson SP 1390 Printer.

1. Make sure the printer is turned on and connected to your computer. If not, turn it on and establish a proper connection.

2. Locate the “Reset” button on your printer. On the Epson SP 1390 Printer, the “Reset” button is typically found on the control panel.

3. Press and hold the “Reset” button for about five seconds. You will notice that the Power and Ink buttons will start flashing.

4. Release the “Reset” button when the Power and Ink buttons stop flashing.

5. Wait for a few moments until the printer completes the reset process. This may take a minute or two.

6. Once the reset process is complete, the printer will turn off and then turn back on automatically. You can now try printing again to see if the issues have been resolved.

Resetting the Epson SP 1390 Printer can help resolve various problems such as paper jams, printer freezing or hanging, print quality issues, and other software-related glitches. However, it’s important to note that resetting the printer may also erase any customized settings or configurations you have previously made, so it’s recommended to take note of any important settings before performing the reset.

If the printer continues to experience issues even after a reset, it may be necessary to seek further assistance from Epson customer support or a professional printer technician to diagnose and resolve the problem.

|You are pondering: Reset Epson Photo 1390 at chiplessprinter.com

Download Epson Photo 1390 Resetter

– Epson Photo 1390 Resetter For Windows: Download
– Epson Photo 1390 Resetter For MAC: Download

Reset Epson Waste Ink Pad Counter
Reset Epson Waste Ink Pad Counter
Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.

How to Reset Epson Photo 1390

1. Read Epson Photo 1390 Waste Ink Pad Counter:

Reset Epson Photo 1390 Step 2

If Resetter shows error: I/O service could not perform operation… same as below picture:
I/O service could not perform operation

==>Fix above error with Disable Epson Status Monitor: Click Here,  restart printer/computer and then try again.
2. Reset Epson Photo 1390 Waste Ink Pad Counter
Reset Epson Photo 1390 Step 3

– Buy Serial Key:
Reset Epson Waste Ink Pad Counter
Reset Epson Waste Ink Pad Counter
Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.
3. Put Serial Key:
Reset Epson Photo 1390 Step 4

4. Wait 30s, turn Epson Photo 1390 off then on
Reset Epson Photo 1390 Step 5

Reset Epson Photo 1390 Step 6

Reset Epson Photo 1390 Step 7

5. Check Epson Photo 1390 Counter
Reset Epson Photo 1390 Step 8

#Peruse further https://chiplessprinter.com/two-solutions-for-factory-resetting-an-epson-stylus-photo-1290-printer.html

How to Reset Epson SP 1390 Printer on Youtube

– Video How to Reset Epson SP 1390 Printer on YouTube, as of the current time, has received 22009 views with a duration of 3:36, taken from the YouTube channel: youtube.com/@Nosware.


Reset Epson Waste Ink Pad Counter
Reset Epson Waste Ink Pad Counter
Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.

Contact Support:

Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien

About dangmien

Information Security, SEO Experts, Web Design, Computer Science, Printer Technician

Check Also

Epson XP850 Reset: Unlimited Ink Pad Reset 100% Free of Viruses

Reset Epson XP-850 Are you tired of receiving error messages on your Epson XP850 printer …

Leave a Reply