Reset Epson Photo 1290
Are you struggling with your EPSON Stylus Photo 1290 printer and in need of a fresh start? A factory reset might just be the solution you’re looking for. This process will restore your printer to its original settings, potentially resolving any issues you may be facing. Here are two easy solutions to perform a factory reset on your printer.
1. Using the Control Panel:
First, ensure that your printer is powered on and connected to your computer. Press the power button to turn off the printer. Locate the maintenance button on the control panel, usually represented by a droplet icon. While holding down the maintenance button, switch on the printer by pressing the power button. Keep the maintenance button pressed until you see the power light and ink out lights flash simultaneously, indicating that the reset process has begun. Once the lights stop flashing, your printer has been successfully reset.
2. Using EPSON Software:
Alternatively, you can use EPSON Software to perform a factory reset. Open the EPSON software on your computer and navigate to the utility option. Look for the EPSON printer model and select it. Within the utility menu, choose the “Factory Reset” or “Restore Default Settings” option. Confirm the reset and wait for the process to complete. Once finished, your printer will be restored to its original factory settings.
Remember, a factory reset will delete any personalized settings and return your printer to its default state. Make sure to back up any important data and settings before proceeding. By following these solutions, you can bring your EPSON Stylus Photo 1290 printer back to life and enjoy improved printing experience.
Download Epson Photo 1290 Resetter
How to Reset Epson Photo 1290
1. Read Epson Photo 1290 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson Photo 1290 Waste Ink Pad Counter
– Buy Serial Key:
4. Wait 30s, turn Epson Photo 1290 off then on
5. Check Epson Photo 1290 Counter
How to factory reset an EPSON Stylus Photo 1290 printer? (2 Solutions!!) on Youtube
– Video How to factory reset an EPSON Stylus Photo 1290 printer? (2 Solutions!!) on YouTube, as of the current time, has received 143 views with a duration of 2:31, taken from the YouTube channel: youtube.com/@RoelVandePaar.