Disable Epson Status Monitor – Windows XP/7/8/10

Error when using Wicreset Utility: “Read Waste Counter” or “Reset Waste Counter”

If Status Monitor Utility is supported by your OS and it's active then disable it.
Disable other aplications that can use the printer and cancel all printing tasks.
I/O service could not perform operation
- An error occurred when application tried to write/read data info from the printer.
- Restart the device each time you see error before starting another operation.
- If possible try to replace USB cable/make sure that network connection is reliable.
- If Status Monitor Utility is supported by your OS and it's active then disable it.
- Disable other aplications that can use the printer and cancel all printing tasks.

Fix above error with Disable Epson Status Monitor

Epson Status Monitor Utility is a utility that monitors Your printer and gives information on errors and printer ink levels.
When You want to use WIC Reset Utility – You have to disable this utility. Follow the instructions:
1. Open the Printers and Faxes / Printers / Devices and Printers folder and enter the Maintenance / Utility section of the printer driver. (Open the Control Panel. Choose Printers and Other Hardware category.)
2. Right-click on the printer icon, then left-click on Printing Preferences.
3. Click on the Maintenance or Utility tab.
4. Click the Epson Status Monitor 3 –> uncheck all option

Get Free Trial Key Wicreset Utility: Free Trial Ink Pad Reset Key

Get Full Key Wicreset Utility:

Reset Epson Waste Ink Pad Counter

Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.